What temp do u fry a turkey?

Contents show

Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and drain turkey. Insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).

Do you fry a turkey at 325 or 350?

Heat oil in pot (allow enough room in pot for turkey to be placed, too much oil will cause overflow), bring oil to at least 375 degrees F. Placement of turkey will bring temperature down and you will want to keep temperature at 325 degrees F. while cooking.

What temperature should I fry my turkey?

Note. When cooking turkey parts, oil temperature should be 325° F; may take 4 to 5 minutes per pound to reach the recommended temperatures (dark meat to an internal temperature of 175° F to 180° F, and white meat to an internal temperature of 165° F to 170° F).

What temperature do you fry a 14 pound turkey at?

Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.

How long does a 20 pound turkey take to deep fry?

When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.

How long do you deep-fry a turkey at 375 degrees?

Deep Frying Tips:

  1. Preheat oil to 375°F (190°C).
  2. Using oven mitts and a turkey basket or holder, CAREFULLY lower the turkey into the oil.
  3. Estimate 3 minutes per pound – a 10 lb turkey takes approximately 30 minutes to deep-fry.

Can I deep-fry a turkey at 250 degrees?

Over high heat, heat the oil to 250 degrees F. Once the oil gets to 250 F, carefully lower turkey into the oil – be sure to use the turkey holder and the handle! This is what the pot looks like right after you put the turkey down in the hot oil. The oil will bubble up.

IT IS IMPORTANT:  Can you cook frozen food in a cast iron skillet?

What temperature should I deep fry a 20 pound turkey?

Deep Frying

Once the oil has reached the correct temperature (350 degrees for turkeys that are 10 to13 pounds, 325 for 14- to 20-pound turkeys) carefully lower the turkey into the boiling oil. Lower the turkey partially, then lift out, and repeat 3 or 4 times.

How long do you fry a turkey at 275 degrees?

Get a helper and place the pot back over the burner. Keep a close watch on the temperature, it should have dropped several degrees by now and you’re shooting for 275 degrees to cook the bird. Cook for 5 minutes per pound. After a few minutes the temp will stabilize and be fairly even during the next hour or so.

How long do I deep fry a turkey at 300 degrees?

Keep the oil temperature above 300 degrees. In just a short time, the oil temperature will begin to rise again. Cook the turkey for 3 1/2 minutes per pound. For example, a 14-pound turkey should cook for 49 minutes, or 14 x 3.5 minutes.

How long do you deep-fry a turkey at 350 degrees?

Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and drain turkey. Insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).

How long should you fry a 15 pound turkey?

Once the temperature of the oil has reached 350°F (180°C), slowly and gently lower the turkey into the oil. SLOWLY AND GENTLY. Fry the turkey for 3 minutes per pound (455 grams). For a 15 lb (6.8 kg) turkey, this will take 45 minutes.

How much peanut oil do you need for a 14 pound turkey?

14 Pound Turkey – Use 5 gallons of oil and cook for 47 minutes. 15 Pound Turkey – Use 5 gallons of oil and cook for 50 minutes. 20 Pound Turkey * – Use 5 to 6 gallons of oil and cook for 3 minutes per pound.

Why is my deep fried turkey turning black?

The general consensus around the fryer was that the blackness was caused by the sugar in the rub.

When should you inject a turkey before frying?

Traditionally, a fried turkey is injected with a marinade before it’s cooked; how long before cooking is a subject of debate. You can inject the turkey anywhere from 24 hours to 5 minutes before frying. We had good results injecting two hours before frying.

Do you have to use peanut oil to fry a turkey?

Roasting a turkey can take hours, so if you want a quicker option, you can deep-fry the turkey in oil instead. While peanut oil is the oil that is traditionally used, you can deep-fry the turkey in any oil that has a high smoke point.

Will fried turkey float when done?

When it is done, the turkey will float to the surface with a perfectly crispy, brown skin. If you are unsure, you can test the meat for doneness at the hip joint or insert a meat thermometer into the breast; it should register 180 degrees.

How long does it take to deep fry a 16lb turkey?

How long does it take to deep fry a turkey? Remember this rule of thumb when learning how to deep fry a turkey: each pound of turkey needs about 3 to 4 minutes to cook. That means a 12 pound turkey can take about 45 minutes, and a 16 pound turkey can take almost an hour!

How many turkeys can you deep fry with the same oil?

Don’t let that deter you because you can reuse oil for frying. Under normal conditions, oil can be heated for up to six hours. A deep-fried turkey can cook in under an hour (three minutes per pound) so you can fry six items on six different occasions with a single batch of oil.

How long does it take peanut oil to reach 350?

Approximately 30 minutes. Be sure the lid is on the fryer to help speed up the process. Use good quality oil with a smoke point of 400°f or higher. Vegetable, corn, canola, soybean, or peanut oils are safe to use.

How long does it take to fry a 17 pound turkey?

Lower turkey into hot oil, very carefully, making sure it is fully submerged. Fry turkey for 3 minutes per pound plus 5 minutes per bird.

Should turkey be room temp before frying?

Step 5: It’s Time to Fry!

Remove the turkey from the refrigerator, place it in a clean aluminum pan and let it sit at room temperature for 30 to 60 minutes. This will help the turkey cook faster and more evenly.

How long do you deep-fry a 19 pound turkey?

To be certain that the turkey is thoroughly cooked, confirm that its internal temperature is between 180-190°F.
How Long Does it Take to Deep Fry a Turkey?

Weight Time to Cook
17 Lbs. 59.5 minutes
18 Lbs. 63 minutes
19 Lbs. 66.5 minutes
20 Lbs. 70 minutes

What is the best oil for turkey frying?

Peanut oil is the best option for deep frying turkey. Its high smoke point makes it the ideal choice for frying a turkey. This oil can be reused as many times as you want. In addition, it has a neutral taste and can be purchased in bulk.

How much oil do I need to deep-fry a 14 pound turkey?

Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.

IT IS IMPORTANT:  Do we need baking soda for pancakes?

Can I cook my turkey at 325 degrees?

Assuming you are roasting your turkey in a 325°F oven, plan on 15 to 17 minutes of cooking time for each pound of an unstuffed turkey. Plan on 20 to 22 minutes per pound for a stuffed turkey. 8-12 lb.

How long do you cook a turkey at 250 degrees?

At 250 degrees F your turkey will take 25 to 30 minutes per pound. At 275 degrees F your turkey will take 20 to 25 minutes per pound.

How long does it take to fry a 19 pound turkey at 300 degrees?

Fry the turkey for 3 minutes per pound and check the internal temperature after about 20 minutes.

Can I fry my turkey at 300?

Fill a 30-quart pot with the appropriate amount of oil (see Cook’s Note) and heat to 300 degrees F. Carefully lower the turkey into the oil and bring the oil temperature up to 350 degrees. Fry until the turkey registers 155 degrees at the breast; start checking after 30 minutes.

Do you cover when frying a turkey?

Keep an eye on the bird for the duration of the frying time, and make sure the temperature is at 350 during cooking. Leave it uncovered. You should fry your turkey for 3-4 minutes per pound.

How do you check if a deep fried turkey is done?

The turkey must be checked for proper doneness using a meat thermometer. The breast should reach 170°F and the thigh should reach 180°F. If the turkey is not done, return it to the hot oil and cook it for an additional 5 minutes.

How much oil do I need to fry a 12 pound turkey?

If you are thinking of deep-frying a turkey, you may be wondering how much oil to use. Luckily, we’ve got the answer! For small turkeys around 9 pounds, use 3-4 gallons of oil. For medium size turkeys around 12-14 pounds, use 4-5 gallons of oil.

Can you use vegetable oil to fry a turkey?

Deep-frying makes the turkey crispy on the outside and super juicy on the inside (even the white meat). It also leaves the heat outside! You can deep-fry the turkey in either peanut or vegetable oil, your choice.

Do you put the lid on when deep frying?

For an outdoor deep fryer, follow the manufacturer’s instructions to turn on the propane gas. Put on the lid, if the fryer has one, while the oil heats up. Depending on what you’re cooking, you’ll probably want to heat the oil between 350 to 400 degrees, or as the manufacturer or a trusted recipe directs.

Can you reuse peanut oil after frying?

When it comes to using the oil multiple times, you can reuse peanut oil, but only a couple of times, and to cook similar dishes. Plus, the longer the oil stays on heat and the hotter it is, the quicker it degrades, so it’s best to assess its quality before using it in another deep-frying session.

How many times can you reuse peanut oil?

When stored properly, peanut oil can be reused up to 3-5 times before it needs to be disposed. Used oil has a much shorter shelf life than fresh oil, so you should use the same batch of oil within only a few months to avoid risks of rancidity.

Can you reuse oil after frying turkey?

A.: You can reuse oil from deep-frying a turkey, provided it was properly stored. According to the National Turkey Federation, after frying, the oil needs to be strained, filtered and cooled. Then put it in a covered container and refrigerate or freeze it so that it won’t go rancid.

How do you get crispy skin on fried turkey?

I suggest you break down a turkey into its pieces, using the thighs, breasts and legs. Brine the pieces, then dry them out in the refrigerator to ensure extra crispy skin, before simply dipping the turkey in buttermilk and seasoned flour. I guarantee that using this method will give you perfect results every time.

Is it better to brine or inject a turkey?

Advantages of injecting turkey:

Injecting works faster than brining. You can inject the bird immediately before cooking. Fats like melted butter, duck fat, or olive oil can be delivered deep into the breast meat, increasing its succulence.

Does injecting a turkey make it juicier?

Flavor injecting turkey not only adds flavor to the meat but also results in a moist and juicy bird. The flavoring is injected into the meat of the turkey as opposed to rubs that only season the skin. Injecting a turkey with a flavored liquid is a good technique for producing moist, flavorful meat.

What do you do with peanut oil after frying a turkey?

Trash It

  1. Allow the oil to cool down post-meal.
  2. Then, pour it into an unbreakable, sealable container.
  3. Seal the lid tightly and throw it away with the rest of your trash.
  4. A post-cooking oil disposal dance is optional.

How long is used peanut oil good for?

Making sure that all food particles have been filtered out prior to storage will also help maintain its freshness. Once opened or used, peanut oil should be used within six months.

Can you mix peanut oil and vegetable oil together to fry a turkey?

While it’s generally safe to mix peanut oil and vegetable oil, keep in mind that you will have to follow the lower smoke point of the oils.

IT IS IMPORTANT:  How long should you boil chicken to shred it?

Can I use a coat hanger to deep fry a turkey?

Deep Fried Turkey Tips: Use water to measure the amount of oil that will be needed if you are unsure of the capacity of your deep fryer. * A heavy wire coat hanger hooked to the wire band that secures the turkey’s legs will help when lowering and lifting the turkey into the hot fat.

Do you fry a turkey at 325 or 350?

Heat oil in pot (allow enough room in pot for turkey to be placed, too much oil will cause overflow), bring oil to at least 375 degrees F. Placement of turkey will bring temperature down and you will want to keep temperature at 325 degrees F. while cooking.

What temperature do you fry a 14 pound turkey at?

Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.

Do you need to brine turkey before deep frying?

You can brine your turkey first, but you don’t have to. A lot of people do, but it isn’t necessary for a successful Deep Fried Turkey. I have made this recipe plenty of times without brining first and they always come out delicious.

Can I use peanut oil for deep frying?

Peanut oil, also known as groundnut oil, has a high smoke point of about 446°F (230°C). It’s popular for deep frying because it has a neutral taste ( 10 ).

How many gallons of oil does it take to fry a turkey?

Place the pot on the burner and clip the deep-fry thermometer to the side of the pot. Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.

How long does oil stay good in a deep fryer?

“How long does oil keep in the deep fryer?” Oil loses a lot of its virtues if it is more than six months old. Most oils should be changed after eight to ten uses. You need to remove oil from the deep fryer after each use, strain it and store it correctly until the next time.

How can I heat oil to 350 without a thermometer?

But without a thermometer, how do you know when your oil is ready to go? One way is to drop a kernel of popcorn into the oil. If the popcorn pops, it tells you the oil is between 325 and 350 F, in the right temperature range for frying. The easiest and safest method is to stick the end of a wooden spoon into the oil.

How long do you deep fry a 20lb turkey?

Fry turkeys that are 10 to 13 pounds for 3 minutes per pound, and for turkeys from 14 to 20 pounds, cook for 3 1/2 minutes per pound. A 10-pound turkey will take about 30 minutes. A 20-pound turkey will require about 1 hour, 10 minutes. Cook until the internal temperature reaches between 180 and 190 degrees Fahrenheit.

How long does it take to heat up 5 gallons of peanut oil?

Heating the oil: In our fryer, ~5 gallons of oil took ~40 minutes to heat up to 175 degrees. You have to watch this process the entire time. If the oil overheats – it can ignite. Of course, you should always keep the lid off during heating, to avoid flash fires.

Can I deep-fry a turkey at 250 degrees?

Over high heat, heat the oil to 250 degrees F. Once the oil gets to 250 F, carefully lower turkey into the oil – be sure to use the turkey holder and the handle! This is what the pot looks like right after you put the turkey down in the hot oil. The oil will bubble up.

When should you inject a turkey before frying?

Traditionally, a fried turkey is injected with a marinade before it’s cooked; how long before cooking is a subject of debate. You can inject the turkey anywhere from 24 hours to 5 minutes before frying. We had good results injecting two hours before frying.

How long do you deep-fry a turkey at 350 degrees?

Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and drain turkey. Insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).

How long should you fry a 15 pound turkey?

Once the temperature of the oil has reached 350°F (180°C), slowly and gently lower the turkey into the oil. SLOWLY AND GENTLY. Fry the turkey for 3 minutes per pound (455 grams). For a 15 lb (6.8 kg) turkey, this will take 45 minutes.

How long do you deep-fry a turkey for?

When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.